Perfect Cover Vapor-Permeable Temporary Floor Protection - 1 x 25m - [VR-28425]

Perfect Cover Vapor-Permeable Temporary Floor Protection - 1 x 25m - [VR-28425]

Perfect Cover Vapor-Permeable has a liquid-tight top layer and a self-adhesive underside, which has been specially developed for all hard and smooth floors such as: laminate, PVC, tiles, plastic floors and stairs. Ideally suited for painting, plastering, moving and (re) building.

Product Description

• Perfect Cover Vapor-Permeable has been specially developed for floors that are sensitive to moisture such as ceramic tiles and wooden floors. The substrate must be dust-free, smooth, clean and free from chemicals. The processing temperature is between 5 and 40 degrees Celsius. Runs must be laid with an overlap of approximately 10 cm. Pre-testing is always recommended.
• Perfect Cover Vapor-Permeable has the highest quality with properties such as anti-slip, liquid-proof, shock-absorbing, breathable and self-adhesive. Tape is therefore no longer necessary. Finally, the product is made from recycled polyester fleece with an extra PE top layer. The special membrane allows moisture to escape and prevents the ingress of liquids. The breathable fleece allows 70 grams per m² per 24 hours to pass through.
• Perfect Cover Vapor-Permeable is not suitable for porous stone floors, natural stone floors, clay tiles and recently laid concrete. In addition, the product can be used for a maximum of 3 months. The underfloor heating must also be switched off.
• Builders temporary floor protection

Specifications

• Available in- 25sqm
• Width- 1.00m
• grammar- 160 grams per m²
• coated - PE film on the top
• Waterproof-Yes
• Absorbent-No
• Breathable-Yes
• Self adhesive-Yes