Beeswift Nitrile Gauntlet Glove 18 Inch Green - BE-NG18
- Unsupported nitrile glove.
- Overall Length 45cm
- A high level of resistance to abrasion, solvents and animal fats.
- Pebble finish to palm
- Silicon and wax free
- EN ISO 374-1: 2016: Type B
- Chemical - Breakthrough Time
- Methanol (A) - More than 60 Mins (Level 3)
- Toluene (F) - More than 10 Mins (Level 1)
- n-Heptane (J) - More than 480 Mins (Level 6)
- Sulphuric Acid 96% (L) - More than 240 Mins (Level 5)
- Sodium Hydroxide 40% (K) - More than 480 Mins (Level 6)
EN388: 2016
- Level 4 - Abrasion
- Level X - Cut Resistance
- Level 0 - Tear Resistance
- Level 2 - Puncture
- Level X - ISO 13997 Blade Cut
EN ISO 374-5:2016
- Protection Against Bacteria and Fungi - Pass
- Protection Against Viruses - Not Tested
Technical Class Specification
EN 388:2016 - Protective gloves against mechanical risks
- Abrasion Resistance 4: High abrasion resistance (8000 cycles)
- Cut Resistance (Coupe Test) X: Not tested/Blade was blunted ISO 13997 cut test required
- Tear Resistance 0: Did not achieve lowest score
- Puncture Resistance 2: Low/Medium puncture resistance (60N)
- Cut Resistance (ISO 13997) B: Low/Medium cut resistance (5)
EN ISO 374-1:2016+A1:2018 - Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks
- A: Methanol 3: 60 - 119 minutes
- F: Toluene 1: 10 - 29 minutes
- J: n-Heptane 6: above 480 minutes
- K: 40% Sodium Hydroxide 6: above 480 minutes
- L: 96% Sulphuric Acid 5: 240 - 479 minutes
EN 374-4:2013 - Determination of resistance to degradation by chemicals
EN 420:2003 + A1:2009 - Protective gloves. General requirements and test methods